RM3090E
_59
Vehicle Exterior
_008795
WIPER / WASHER
_0059609
WASHER LEVEL WARNING SWITCH
G
WIPER / WASHER WASHER LEVEL WARNING SWITCH INSPECTION
PROCEDURE
85397
1.INSPECT LEVEL WARNING SWITCH ASSEMBLY
0.76,2.063 1.073,2.219
0.313,0.156
10
false
*a
*a
| *a | Component without harness connected
(Level Warning Switch Assembly) |
- HINT:
-
The following check should be performed with the level warning switch assembly installed to the windshield washer jar assembly.
a.
Fill the windshield washer jar assembly with washer fluid.
b.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1 - 2 Fluid volume is more than 800 ml 10 kΩ or higher Fluid volume is less than 600 ml Below 1 Ω
If the result is not as specified, replace the level warning switch assembly.
.png "close")